PSA Veneer Sheets
FormWood PSA veneer sheets provide a simple peel-and-stick alternative for applying hardwood veneer without a separate adhesive step. Backed with 3M® brand pressure sensitive adhesive, PSA veneer bonds to smooth, dry and clean substrates and is a practical choice for cabinet refacing, repairs, columns, displays, fixtures and interior renovation projects.
Quick Highlights
- Peel-and-stick veneer application
- Backed with 3M® brand pressure sensitive adhesive
- No secondary adhesive required
- Flexible and easy to cut with common tools
- Works well for cabinet refacing, repairs, fixtures and columns
- Available in over 100 wood species and cuts
- Can bend to a tight radius, depending on species
Why Choose FormWood PSA Veneer Sheets?
Simplified application
PSA veneer removes the need to apply a separate adhesive, making it useful for refacing and renovation work.
Premium veneer quality
FormWood applies the same grading, matching and quality checks used across its hardwood veneer products.
Dependable adhesive backing
The pressure sensitive adhesive is designed to create a permanent bond when applied to the right substrate conditions.
Product Specs
| Feature | Details |
|---|---|
| Product type: | Pressure sensitive adhesive hardwood veneer sheet |
| Adhesive: | 3M® brand PSA backing |
| Thickness: | .025 plus or minus .005 |
| Size availability: | 2' x 8', 4' x 8' |
| Machine surface sand: | 150 grit |
| Packaging standard: | 2-10 pcs / 11-15 pcs |
| Typical box size: | 11-3/8" x 11-3/8" x 50" / 13-5/8" x 13-5/8" x 50" |
| Weight per 4' x 8' sheet: | 4.4 lbs |
| Flexibility: | Approximately 1" bending radius, varies with species |
| Standard size: | 2' x 8' |
| Maximum size: | 4' x 10' |
| Note: | Maximum PSA sheet size is 4' x 10'. PSA is not available in crossgrain sizes. |
| Recommended glue: | No secondary glue required; PSA backing included |
Find the Right Veneer for Your Project
FormWood panels and sheets can be paired with a wide range of wood species, cuts, and grades from our veneer library. Whether you need a standard hardwood, specialty species, or a specific grain and color match, our team can help you find the right veneer for your application.
Frequently Asked Questions
PSA veneer is hardwood veneer with pressure sensitive adhesive already applied to the back. It is often called peel-and-stick veneer.
PSA veneer should be applied to a smooth substrate that is dry and free of dust, grease, wax and other contaminants.
No. PSA veneer is designed as an adhesive-backed product and does not require a secondary adhesive.
It is commonly used for cabinet refacing, furniture repair, column wraps, displays, fixtures and interior renovation projects.
Yes. It can be cut and trimmed with ordinary tools such as scissors or a utility knife.
Installation Recommendations
Acclimate PSA veneer before application.
Inspect material before cutting or applying.
Apply only to a smooth, dry, clean substrate that is free of dust, grease, wax and contaminants.
Maintain ideal application conditions of 70-80°F and approximately 35% relative humidity when possible.
Peel the release liner gradually and position carefully to avoid trapping air.
Use a veneer scraper to apply firm, even pressure from the center outward and with the grain.
Pay special attention to edges to ensure full adhesive contact.
Allow adhesive to cure for 48 hours before finishing unless project conditions or adhesive guidance require otherwise.
Not sure which product is right for your project?
Our sales team can help you find the best solution.
