FormEdge™ Non-Glued Edgebanding
FormWood automatic non-glued fleece backed edgebanding is designed for shops that apply adhesive during production and need a dependable real wood veneer edge. Made in continuous 500-foot rolls, this Form-Edge™ option is stocked in most popular species and sanded to a 180-grit surface finish. The fleece backing adds strength and handling support while allowing manufacturers to create a clean, coordinated edge on veneered panels, cabinetry, furniture and architectural millwork.
Quick Highlights
- Non-glued fleece backed veneer edgebanding for automatic application
- Stocked in 5/8 in. to 1 in. widths by 500 ft. rolls
- Stocked in most common species: Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir
- Special widths available with minimum order quantities and extended lead times
- 180-grit surface finish for production-ready use
- Fleece backing adds strength and supports cleaner handling
- Store wrapped in plastic to help maintain moisture stability
Why Choose FormWood FormEdge™ Non-Glued Edgebanding?
Real wood veneer edge quality
FormWood edgebanding helps exposed panel edges coordinate with the face veneer for a more finished, professional appearance.
Built for production workflows
The non-glued format is a strong fit for shops that already apply adhesive through automatic edgebanding equipment.
Stocked species and custom options
Stocked in most popular species, with special widths available when project requirements call for something outside the standard range.
Product Specs
| Feature | Details |
|---|---|
| Product type: | Automatic non-glued fleece backed veneer edgebanding |
| Stocked widths: | 5/8 in. to 1 in. |
| Standard roll length: | 500 lineal feet |
| Stocked species: | Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir |
| Special widths: | Available with minimum order quantities and extended lead times |
| Thickness: | 0.022 in. plus or minus 0.002 in. |
| Surface finish: | 180 grit |
| Core size: | 5 in. |
| Weight: | 3.5 lbs. per roll at 7/8 in. |
| Packaging standard: | 5 rolls per package |
| Storage: | Store in plastic wrap to help ensure moisture stability and reduce moisture loss |
Frequently Asked Questions
It is fleece backed veneer edgebanding supplied without adhesive, making it a good option for shops that apply their own adhesive during automatic edgebanding production.
This product is stocked in 5/8 in. to 1 in. widths by 500 ft. rolls.
Standard stocked species include Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir.
Yes. Special widths are available, but they require minimum order quantities and extended lead times.
Material should be stored in its plastic wrap to help maintain moisture stability and reduce moisture loss
No. This page is for non-glued fleece backed edgebanding. FormWood also offers a prefinished non-glued edgebanding option for select species.
Installation Recommendations
Store edgebanding in its plastic wrap until the material is ready to be used so moisture stability is maintained and moisture loss is reduced.
Acclimate rolls to the production environment before application, especially when material has been stored in a different temperature or humidity range.
Confirm species, width, thickness, finish and roll condition before cutting or running production.
Use clean, properly maintained edgebanding equipment and follow the adhesive, heat, pressure and feed-rate settings recommended for the application method.
Make test runs before full production to confirm bond strength, trimming quality, color match and finish expectations.
Handle finished edges carefully after application and finishing to help avoid dents, scratches or edge damage.
Not sure which product is right for your project?
Our sales team can help you find the best solution.
