FormEdge™ Prefinished Edgebanding
FormWood pre-finished automatic non-glued veneer edgebanding provides a real wood veneer edge with a clear satin UV lacquer finish already applied. Produced from A-grade finger-jointed veneer selected for color and grain consistency, this Form-Edge™ option is designed to coordinate with prefinished hardwood panels and reduce finishing steps in production. It is stocked in popular widths and species, with special widths available when minimum order quantities and extended lead times are met.
Quick Highlights
- Pre-finished non-glued veneer edgebanding for automatic application
- SStocked in common widths, 500’ roll length
- Stocked species include Maple, Cherry and Red Oak
- Produced from A-grade finger-jointed veneer selected for color and grain consistency
- Standard satin clear coat with a gloss level between 20 and 30
- UV lacquer finish at 1.5 mils in coverage
- Finish is resistant to heat, staining and scratching
Why Choose FormWood FormEdge™ Prefinished Edgebanding?
Prefinished convenience
The clear satin UV lacquer finish is already applied, helping reduce finishing steps after the edge is applied.
Designed to match prefinished panels
The gloss level and finish are designed to coordinate with pre-finished hardwood panels for a consistent final appearance.
Selected for appearance
FormWood uses A-grade finger-jointed veneer selected for color and grain consistency, helping support a cleaner finished edge.
Product Specs
| Feature | Details |
|---|---|
| Product type: | Pre-finished automatic non-glued veneer edgebanding |
| Stocked width: | 7/8 in. |
| Standard roll length: | 500 lineal feet |
| Stocked species: | Maple, Cherry and Red Oak |
| Special widths: | Available with minimum order quantities and extended lead times |
| Thickness: | 0.020 in. plus or minus 0.002 in. |
| Gloss level: | 20 to 30 standard |
| Finish: | Satin clear coat |
| Coating: | UV lacquer finish at 1.5 mils in coverage |
| Veneer quality: | A-grade finger-jointed veneer selected for color and grain consistency |
| Finish performance: | UV lacquer coating is resistant to heat, staining and scratching |
| Storage: | Store in plastic wrap to help ensure moisture stability and reduce moisture loss |
Frequently Asked Questions
This product has a clear satin UV lacquer finish already applied, which helps reduce finishing steps after application.
Standard stocked species include Maple, Cherry and Red Oak.
A gloss level between 20 and 30 is standard.
A high-quality clear UV lacquer finish is applied at 1.5 mils in coverage. The standard finish is a satin clear coat.
The UV lacquer coating is designed to resist heat, staining and scratching.
Yes. Special widths require minimum order quantities and extended lead times.
Installation Recommendations
Store edgebanding in its plastic wrap until the material is ready to be used so moisture stability is maintained and moisture loss is reduced.
Acclimate rolls to the production environment before application, especially when material has been stored in a different temperature or humidity range.
Confirm species, width, finish, gloss level and roll condition before running production.
Because this product is prefinished, make test runs to confirm trimming, handling and finished-edge appearance before full production.
Use clean, properly maintained edgebanding equipment and follow the adhesive, heat, pressure and feed-rate settings recommended for the application method.
Protect the finished surface during application, trimming, handling and installation to help prevent scratches, dents or finish damage.
Not sure which product is right for your project?
Our sales team can help you find the best solution.
