FormEdge™ Pre-Glued Edgebanding
FormWood pre-glued fleece backed veneer edgebanding is designed for efficient application when a hot melt adhesive layer is preferred. Stocked in 250-foot rolls, this real wood veneer edgebanding offers the same coordinated look as FormWood non-glued edgebanding with the added convenience of a pre-applied adhesive. It is a practical choice for cabinetry, furniture, panel processing and millwork applications where shops want a clean veneer edge with a streamlined application process.
Quick Highlights
- Pre-glued fleece backed veneer edgebanding with hot melt adhesive
- Stocked in 5/8 in. to 13/16 in. widths by 250 ft. rolls
- Available in 12 stocked species: Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir
- Special widths available with minimum order quantities and extended lead times
- 0.034 in. thickness plus or minus 0.002 in. based on 0.012 in. of hot melt
- 180-grit surface finish
- Store wrapped in plastic to help maintain moisture stability
Why Choose FormWood FormEdge™ Pre-Glued Edgebanding?
Streamlined application
The pre-applied hot melt adhesive helps simplify production where pre-glued veneer edgebanding is preferred.
Coordinated real wood appearance
The veneer face helps exposed edges complement FormWood veneer panels and other real wood surfaces.
Reliable stocked options
FormWood stocks 12 commonly specified species and can support special-width needs when order quantities and lead times allow.
Product Specs
| Feature | Details |
|---|---|
| Product type: | Pre-glued fleece backed veneer edgebanding |
| Stocked widths: | 5/8 in. to 13/16 in. |
| Standard roll length: | 250 lineal feet |
| Stocked species: | Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir |
| Special widths: | Available with minimum order quantities and extended lead times |
| Thickness: | 0.034 in. plus or minus 0.002 in., based on 0.012 in. of hot melt |
| Surface finish: | 180 grit |
| Core size: | 3 in. |
| Weight: | 2.5 lbs. per roll at 13/16 in. |
| Packaging standard: | 5 rolls per package |
| Storage: | Store in plastic wrap to help ensure moisture stability and reduce moisture loss |
Frequently Asked Questions
Pre-glued veneer edgebanding includes a hot melt adhesive layer so it can be applied without adding separate adhesive during the application process.
This product is stocked in 5/8 in. to 13/16 in. widths by 250 ft. rolls.
Standard stocked species include Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir.
Yes. Special widths require minimum order quantities and extended lead times.
The thickness is 0.034 in. plus or minus 0.002 in., based on 0.012 in. of hot melt adhesive.
Keep material in plastic wrap until use to help maintain moisture stability and reduce moisture loss.
Installation Recommendations
Store edgebanding in its plastic wrap until the material is ready to be used so moisture stability is maintained and moisture loss is reduced.
Acclimate rolls to the production environment before application, especially when material has been stored in a different temperature or humidity range.
Confirm species, width, thickness, finish and roll condition before cutting or running production.
Use clean, properly maintained edgebanding equipment and follow the adhesive, heat, pressure and feed-rate settings recommended for the application method.
Make test runs before full production to confirm bond strength, trimming quality, color match and finish expectations.
Handle finished edges carefully after application and finishing to help avoid dents, scratches or edge damage.
Not sure which product is right for your project?
Our sales team can help you find the best solution.
