Uni-FormWood® Laminates

Need a quote or more information?
Contact our sales department 877.848.0871

Provide a look more beautiful that Mother Nature intended. Uni-FormWood® laminates feature guaranteed color and grain consistency and are surprisingly less expensive than their naturally imperfect, real species counterparts. These reconstituted wood veneers are defect-free, identical from sheet to sheet, and are offered on your choice of backers from paper to plywood.

Uni-FormWood® is a man-made, obeche-based wood product that has been formed and dyed to exemplify a myriad of wood species. The process begins by rotary slicing the logs to yield sheets of veneer. The veneer is dyed for color by soaking in nontoxic water-based dyes for about 12 hours. The sheets are then collated in stacks, with a layer of transparent glue between each sheet. The collated veneer goes into a mold, which presses them together to form a solid block of wood. The block is then sliced to yield veneer of a certain design or wood structure, depending on the type of cut.

Are you searching for reconstituted wood from Brookside, Echo Wood or Vinterio? FormWood Industries can source and fabricate the material that you want in patterns from these brands.

AVAILABLE PATTERNS

Birdseye Maple
Birdseye Maple
XBEMHE
Uniformwood Flat Cut Cherry
Flat Cut Cherry
XCHE4-V001
UniFormwood Cherry Qtr Cut
Cherry Qtr Cut
XCHEQ-D001
UniFormwood Ebony Qtr Cut
Ebony Qtr Cut
XEBYQ-D001
Uniformwood Fir Qtr Cut
Fir Qtr Cut
XFIRQ-D001
UniFormwood Mahogany Qtr Cut
Mahogany Qtr Cut
XMAAQ-D001
UniFormwood Recon Maple F/C
Maple F/C
XMAP-V001
UniFormwood Recon Maple Qtr Cut
Maple Qtr Cut
XMAPQ-D001
UniFormwood Teak Qtr Cut
Teak Qtr Cut
XTEAQ-D001
UniFormwood Walnut F/C
Walnut F/C
XWAL4-V001
UniFormwood Walnut Qtr Cut
Walnut Qtr Cut
XWALQ-D001
UniFormwood Wenge Qtr Cut
Wenge Qtr Cut
XWENQ-D001
White Oak Rift
XWHOR-D001
Zebrawood Qtr Cut
XZEBQ-D001
   

Features and Benefits:

  • Affordable, real wood option to expensive exotics
  • Consistent color and grain from sheet to sheet
  • Environmentally friendly alternative to rare species
  • Over 40 patterns available
  • Applies like standard veneer
  • Available in paper-back, NBL®, TP, DB, and Architectural Panels

Technical Specifications:

  • Machine Surface Sand: 150 grit
  • Standard Size: 4' x 8'
  • Maximum Size: 4' x 10'

Storage:

  • Best to store in a climate controlled environment. (Heated in winter/Air-conditioned in summer.)
  • Relative humidity of 35% is best.
  • Avoid exposure to sunlight.
  • Can be stored at least 12 months in dry and cool (15-25°C/58-76°F) conditions.
General Application Information
  • Inspect material for satisfaction of quality and grade prior to lamination.
  • All veneer should be acclimated prior to application.
  • Ideal temperature for application is 70-80°F.
  • Ideal humidity is 35%
  • Surface must be clean, dry and smooth (free of dust, grease, wax) to ensure a good bond.
  • Veneer scrapers are recommended for hand application to allow for maximum pressure. "J" rollers are not recommended.
  • Adhesive should be allowed to cure for 48 hours prior to finishing.

Request a Quote Now! Email Signup
Request a QUOTE

Have a question? Just Ask. If you'd like pricing call us today or request a quote now.