FormWood Hotmelt Veneer Sheets

FormWood Hotmelt veneer provides a simple and easy alternative for applying veneer without the need to use a secondary adhesive. Our medium viscosity hotmelt has a long open time, good hot tack and good color and heat stability in the melt.

Hardwood Laminates Product Spec sheet

Features and Benefits

  • Hotmelt backed veneer is a superb choice for home craftsmen and professional woodworkers due to its ease of application
  • Sheet sizes are 2'x8' and 2'10'
  • PSA veneer can be cut and trimmed with ordinary tools, such as scissors or a utility knife
  • 100-plus wood species and cuts, including many exotics, are ready for quick shipment
  • Tenderized FormWood Hotmelt veneer will bend to a moderate radius

Technical Specifications

Information is based on a 2'x8' sheet.

  • Thickness: .033 plus or minus .005
  • Size Availability: 2' x 8', 2' x 10'
  • Machine Surface Sand: 150 grit
  • Packaging Standard: 20 pieces
  • Typical Box Size: 14"x14"x25"
  • Weight 2'x8' Sheet: 1.8 lbs
  • (Bending Radius) Flexibility: Approximately 1" (varies with species)
  • Standard Size: 2'x8'
  • Maximum Size: 2'x10'
  • Recommended Glue: Self-adhering


  • Best to store in a climate controlled environment. (Heated in winter/Air-conditioned in summer.)
  • Relative humidity of 35% is best.
  • Avoid exposure to sunlight.
  • Can be stored at least 12 months in dry and cool (15-25°C/58-76°F) conditions.
Color and Grain Appearance
  • Variation can be expected from sheet to sheet and lot to lot.
  • Sequence matching available upon request.
General Application Information
  • Inspect material for satisfaction of quality and grade prior to lamination.
  • All veneer should be acclimated prior to application.
  • Ideal temperature for application is 70-80°F.
  • Ideal humidity is 35%.
  • Surface must be clean, dry and smooth (free of dust, grease, wax) to ensure a good bond.
  • Application temperature 180-200°C (356-392°F) in the melt. The structure of the edge material and working conditions may influence the bond. Customer trials are recommended.
  • Veneer scrapers are recommended for hand application to allow for maximum pressure. "J" rollers are not recommended.
  • Adhesive should be allowed to cure for 48 hours prior to finishing.
Request a Quote Now! Email Signup
Request a QUOTE

Have a question? Just Ask. If you'd like pricing call us today or request a quote now.