FormBond Adhesive

FormBond is a high strength, high temperature, low VOC solvent-based spray adhesive for industrial use in a variety of applications. It contains no CFCs, is waterproof and dries clear.

Directions for use

Surface must be clean of dust and dirt and substrate should be properly conditioned. Prior to use a small test patch should be sprayed to evaluate substrate compatibility. This product may degrade some thin plastics and films.

Apply a uniform coat of adhesive evenly across the surface. Spray both surfaces to be bonded; one surface vertically and the other surface horizontally. Allow adhesive to tack up until no adhesive transfers to finger when touched (approximately 2 to 3 minutes).

Clean up: Use Adhesive Remover or other petroleum solvents.

Technical Data

  • Contains NO chlorinated solvents
  • VOC Range: <55% by weight
  • Color: White when sprayed, dries clear
  • Solvent: Cyclohexane / Acetone
  • Boiling Point: 140° F
  • Shelf Life: 12 months (agitate before use)
  • Optimum Spray Temperature: 60° F to 80° F
  • Storage: Keep from freezing
  • Flammable: Yes
  • Service Temperature: -30° F to 220° F

Performance Features

  • Low VOC levels for use in any location
  • Formulated for rapid application
  • Bond can withstand heat and humidity
  • Applies easily and adheres to various substrates
FormBond can provide a fast tacking, strong, permanent and waterproof bond
  • High Tensile Strength
  • Ample Peel Strength
  • High Temperature Resistance Level of Bonding
  • High solids Web Pattern Formulation for Extended Coverage.

Please see our Application Guidelines for more details.

Request a Quote Now! Email Signup
Request a QUOTE

Have a question? Just Ask. If you'd like pricing call us today or request a quote now.