You're Here:
Veneer EdgebandingFormWood's Form-Edge™ Edgebanding is produced by joining individual pieces of veneer together into a continuous master roll by finger-jointing the veneer. The rolls are laminated with a fleece, then sanded and slit to finished widths. Finger joints are made by joining the veneer together using a die cut finger layout in the veneer and then gluing them together using joint tape. To ensure color and grain matching at the finger joint, every other piece of veneer is flipped end to end. The fleece (cellulous membrane) laminated to the back of the veneer provides strength to reduce cracking and breaking. The fleece is also colored to blend with the veneer to reduce any line between the banding and the substrate. 3 Types of FormEdgeTM Veneer Edgebanding Available:
Features and Benefits
Automatic (Non-Glued) Fleece Backed EdgebandingStocked in 5/8" - 1" wide x 500' rolls Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir (12 species) Special widths require minimum order quantities and extended lead times
Pre-Glued Fleece Backed, Veneer EdgebandingStocked in 5/8" - 13/16" wide x 250' rolls Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir (12 species) Special widths require minimum order quantities and extended lead times
Pre-finished Automatic (Non-Glued), Veneer EdgebandingStocked in 7/8" wide x 500' rolls Maple, Cherry, Red Oak (3 species) Special widths require minimum order quantities and extended lead times
Other facts about Pre-finished FormEdgeTM Edgebanding
Request a Quote Now!
Email Signup
Request a QUOTE
Have a question? Just Ask. If you'd like pricing call us today or request a quote now. |
||
Questions?
Give us a call or Email Us
© 2018 FormWood Industries, Inc. All rights reserved. | 1601 Production Drive Jeffersonville, IN 47130 (USA) | Legal | Contact Us | Site Map
|