Hardwood Veneer Custom Faces

Hardwood Veneer Custom Faces

FormWood Industries will source and splice hardwood veneer faces to meet your specifications. We work closely with designers and architects to develop unique, cost-effective alternatives to applying nature’s wood beauty to store interiors, elevators, lobbies, furniture, cabinets and casework.

Features and Benefits

  • Faces may be Book or Slip Matched
  • Running, Balanced, Center-Balanced, or Blueprint Matching available
  • Long grain material available in 4' x 8', 4' x 10', 4' x 12', 5' x 8', 5' x 10', and 5' x 12'
  • Cross grain material available in 8' x 4', 10' x 4', 12' x 4', 8' x 5', and 10' x 5'
  • Specific parts can be created to meet your needs on a repeating basis
  • Custom faces available to fill your specific needs for one-time orders
  • Quick lead times possible due to the vast flitch inventory maintained at FormWood’s facility
  • Flitch sampling available to allow you to specify the perfect log for your application
  • Custom sizing up to 5'x12' possible for over 100 cuts and species of veneer

Technical Specifications

Information is based on a 4’x8’ sheet.

  • Thickness: 1/28" - 1/40"
  • Standard Size: 4' x 8'
  • Maximum Size: 5' x 12'
  • Shipping Method: Flat via LTL or dedicated carrier
  • Minimums may apply

Storage

  • Best to store in a climate controlled environment. (Heated in winter/Air-conditioned in summer.)
  • Relative humidity of 35% is best.
  • Avoid exposure to sunlight.
  • Can be stored at least 12 months in dry and cool (15-25°C/58-76°F) conditions.

Color and Grain Appearance

  • Variation can be expected from sheet to sheet and lot to lot.
  • Sequence matching available upon request.

General Application Information

  • Inspect material for satisfaction of quality and grade prior to lamination.
  • All veneer should be acclimated prior to application.
  • Ideal temperature for application is 70-80°F.
  • Ideal humidity is 35%.
  • Surface must be clean, dry and smooth (free of dust, grease, wax) to ensure a good bond.
  • Veneer scrapers are recommended for hand application to allow for maximum pressure. “J” rollers are not recommended.
  • Adhesive should be allowed to cure for 48 hours prior to finishing.